Home - Return to Previous Page
Additional Images

2005-2007 6.0L Powerstroke S&B 76-1010B Intake Elbow with Cold Side Intercooler Piping & Boots

HD140335
2005-2007 6.0L Powerstroke S&B 76-1010B Intake Elbow with Cold Side Intercooler Piping & Boots
47.54% more airflow than stock @ 612 CFM
Constructed out of cast aluminum, if you treat these elbows right, they're going to stand up to everything you've got. CNC machined cut for an excellent fit, which not only eliminates poor fit, it also makes these easy to install. S&B engineers and tests their products to the highest standards, and the intake elbows are no different.
- Constructed of cast aluminum
- CNC machine cut for excellent fit
- Engineered and test to the highest standards
- Pre-tapped holes for injection systems
- Designed to withstand extreme pressure
= Easy to install right at home
If you're planning on pushing your diesel to limit, you need to make sure everything under the hood can stand the pressure, literally. S&B intake elbows are designed to withstand massive amounts of PSI, way more than stock.
While airflow is important?
Answer: it is equally critical to insure that your investment is protected. To do so, we first determine the max CFM the vehicle will generate at wide open throttle as it is more difficult to stop dust the greater the airflow. We then start pulling this amount of air through the intake while literally shooting fine particles of dust at the filter. Any dust bypassing the filter will be caught in the absolute blanket to determine the efficiency.

Was: $554.10
Sale: $467.66
Save: 16%
Save: $86.44
Qty:
Purchases over $399.00 Qualify for FREE GROUND SHIPPING!

Description

2005-2007 6.0L Powerstroke S&B 76-1010B Intake Elbow with Cold Side Intercooler Piping & Boots
47.54% more airflow than stock @ 612 CFM
Constructed out of cast aluminum, if you treat these elbows right, they're going to stand up to everything you've got. CNC machined cut for an excellent fit, which not only eliminates poor fit, it also makes these easy to install. S&B engineers and tests their products to the highest standards, and the intake elbows are no different.
- Constructed of cast aluminum
- CNC machine cut for excellent fit
- Engineered and test to the highest standards
- Pre-tapped holes for injection systems
- Designed to withstand extreme pressure
= Easy to install right at home
If you're planning on pushing your diesel to limit, you need to make sure everything under the hood can stand the pressure, literally. S&B intake elbows are designed to withstand massive amounts of PSI, way more than stock.
While airflow is important?
Answer: it is equally critical to insure that your investment is protected. To do so, we first determine the max CFM the vehicle will generate at wide open throttle as it is more difficult to stop dust the greater the airflow. We then start pulling this amount of air through the intake while literally shooting fine particles of dust at the filter. Any dust bypassing the filter will be caught in the absolute blanket to determine the efficiency.

Shipping Information

  • Item Requires Shipping
  • Purchases over $399.00 Qualify for FREE GROUND SHIPPING!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.